PROLOGUE

A Physiotherapist led pre-purchase fit, designed to inform and guide frame size selection unique to the athlete’s cycling goals. The rider will leave with a published post-fit report detailing stack/reach measurements and knowledge pertaining to their biomechanics and cycling kinematics. This is designed for riders looking to upgrade or starting a cycling specific discipline.

Your 2 hour session:

• Specialist Physiotherapy consultation and biomechanical assessment.
• Body Positioning Process led fit on our bespoke stationary bike.
• A post-fit report detailing positional measurements and setup.
• A supplementary bike recommendation service is available.

ETAPE 1

A comprehensive Physiotherapist led bike fit bespoke to the rider’s needs. Serving as a first fundamental fit, the rider will leave with their bike position adjusted and optimised to reflect their cycling goals and biomechanics. Following a methodical detailed process, Kinovea motion capture and gebioMized saddle pressure mapping data are utilised to inform positional interventions from every angle; prioritising comfort, sustainability without compromising power.

Suitable for either Road or TT specific setups, this fit considers every contact point.

Your 3.5 hour session:

• A Specialist Physiotherapy consultation and biomechanical assessment: informing where adjuncts such as insoles, shims and wedges are indicated, easing saddle issues, resolving pain and optimising performance.
• Assessment of current cycling kinematics with informed intervention led positional changes to all contact points.
• A detailed post-fit report with published positional measurements, providing individualised advice on equipment, training and potential injury management strategies.

This is our chief fit package, underpinning the fundamental aspects of bike fitting. Used in sequence, this offers synergy when used as a precursor to Étape 2.

ETAPE 2

An extensive Physiotherapist led bike fit that takes your performance to the next level. Designed to optimise pedalling efficiency, stability, and performance. This fit utilises a combination of technologies and techniques. The Étape 2: Performance Fit is designed for riders looking to prioritise power and performance, without compromising comfort. Serving as an enhanced fit for riders with performance goals, it evolves the position established in Étape 1 in an effective and evidence based manner.

Your 3 hour session:

• A Specialist Physiotherapy consultation and biomechanical assessment
• An intervention led Body Positioning Process guided by gebioMized saddle pressure data, delivered using our purpose-built bike jig system and bespoke stationary bike
• The rider will leave with a refined position and a detailed post-fit report pertaining to the interventions made, with supporting commentary and data; informing aerodynamic testing.

This fit generates ‘Windows of Optimisation’, a range of positional measurements of contact points where pedalling efficiency, saddle stability, and comfort is maintained. With application, these ranges can directly structure wind tunnel exploration for a truly optimised position.

ETAPE 1

A comprehensive Physiotherapist led bike fit bespoke to the rider’s needs. Serving as a first fundamental fit, the rider will leave with their bike position adjusted and optimised to reflect their cycling goals and biomechanics. Following a methodical detailed process, Kinovea motion capture and gebioMized saddle pressure mapping data are utilised to inform positional interventions from every angle; prioritising comfort, sustainability without compromising power.

Suitable for either Road or TT specific setups, this fit considers every contact point.

Your 3.5 hour session:

• A Specialist Physiotherapy consultation and biomechanical assessment: informing where adjuncts such as insoles, shims and wedges are indicated, easing saddle issues, resolving pain and optimising performance.
• Assessment of current cycling kinematics with informed intervention led positional changes to all contact points.
• A detailed post-fit report with published positional measurements, providing individualised advice on equipment, training and potential injury management strategies.

This is our chief fit package, underpinning the fundamental aspects of bike fitting. Used in sequence, this offers synergy when used as a precursor to Étape 2.

ETAPE 2

An extensive Physiotherapist led bike fit that takes your performance to the next level. Designed to optimise pedalling efficiency, stability, and performance. This fit utilises a combination of technologies and techniques. The Étape 2: Performance Fit is designed for riders looking to prioritise power and performance, without compromising comfort. Serving as an enhanced fit for riders with performance goals, it evolves the position established in Étape 1 in an effective and evidence based manner.

Your 3 hour session:

• A Specialist Physiotherapy consultation and biomechanical assessment
• An intervention led Body Positioning Process guided by gebioMized saddle pressure data, delivered using our purpose-built bike jig system and bespoke stationary bike
• The rider will leave with a refined position and a detailed post-fit report pertaining to the interventions made, with supporting commentary and data; informing aerodynamic testing.

This fit generates ‘Windows of Optimisation’, a range of positional measurements of contact points where pedalling efficiency, saddle stability, and comfort is maintained. With application, these ranges can directly structure wind tunnel exploration for a truly optimised position.